CORNELIUS KEG REPLACEMENT SEAL KIT (no poppet seals)

$5.50

  • Shipping Weight: 0.02kgs
  • 86 Units in Stock

This seal set will fit PIN LOCK and BALL LOCK kegs.

The seals do wear out, so they will need replacing after some time.  Included in this seal kit are the lid O-ring,  4 x dip tube seals, and 2 x Tank plug (body-connect, post-seal) O-ring .

Sometimes the rubber in the seals retain that soda smell, so you want to replace them.

The way to check for leaks is pressurize the system and put soapy water on all the seals, and if it starts to bubble up then that is where the leak is. An alternative is to pressurize the keg, then dunk it in a bath full of water. You should check the seals periodically, and even better every time you re-pressurize your keg.

Note: The lid O-ring is for the hatch-type Cornelius keg as in the picture, not the screw lid type.  You may receive a white lid O-ring or black lid O-ring depending on stock.


Included:
  • 1 x Large O-ring for Cornelius keg lid
  • 4 x Dip tube seals (you only need 2, but some people prefer to double up the seals to be extra sure)
  • 2 x Tank plug (body-connect, post) O-ring



Ask a question

Add to Cart: